A Barrack Electrical electrician talking with a fisherman on Belmont Wharf at Lake Macquarie

Electrician in Belmont

Screws through cables, and wet lights that never tripped.

Your local electrician in Belmont. More than 15 electrical jobs at 11 properties in Belmont and Belmont North since June 2024.

Request a callback Call 0400 232 172

5.0 from 205 Google reviews

On timewe call when we are on the way
Fixed pricein writing, before we start
Lifetimeworkmanship warranty
Licensedcontractor 463908C
2026 winnerHunter Local Business Awards

Electrical problems we fix in Belmont

Belmont faults have hidden behind a roofing screw, a broken earth wire and a fan wired through a wall.

Electrician on a ladder working on a ceiling light

Lights that keep failing

A roofing screw had gone through the lighting cable, with a second fault in the extension. We repaired both and put the lights on new safety switches.

Fault finding >

A new twin-spot sensor light lit on a weatherboard wall, the movement sensor below the lamps

A wet light that never tripped

The metal light's earth wire was broken, which is likely why the safety switch never tripped. We fitted a new double-insulated light and flagged the earth fault.

Outdoor lighting >

Barrack Electrical electrician wiring a new LED batten light before fitting it

Bathroom fan died

A ceiling fan had been hardwired through a wall. We fitted a new fan on a proper plug, and flagged the circuits with no safety switch.

Exhaust fans >

Need an electrician in Belmont?

Tell us what is going on. We ring you back, usually the same day.

Request a callback Call 0400 232 172

Sheds and laundries in Belmont

No power in the shed

We connected an existing shed feed, then fitted power points, an LED batten, an office fan with a light and a sensor light outside.

Power points >

A new LED batten lit inside an empty shed, seen through the open roller door

One side of the laundry point dead

Only one side of a laundry double power point worked. We replaced it, and flagged that most of the circuits had no safety switch.

Switchboard upgrades >

Home switchboard fitted with safety switches

More electrical work in Belmont

Rangehood stopped working

The slide-out rangehood in a Belmont rental had died. We removed it, fitted a new one and left spare filters for the tenant.

Rental appliances >

LED lighting installed in a bright kitchen

Too much on one power circuit

Upstairs and downstairs shared one power circuit. We split them onto separate circuits and replaced worn power points in the entry, garage and storage.

Power points >

Electrician working inside a switchboard

Dead after the storm

After an electrical storm, fans, a TV and other items had stopped working. We isolated and tested each one and listed what could not be repaired.

Fault finding >

A Barrack Electrical electrician kneeling to measure up before starting work

Your electrician in Belmont

Homeowners

Lighting faults, wet sensor lights and shed power.

Landlords and agents

Wet sensor lights and half-dead laundry points in Belmont North rentals, each with a CCEW (Certificate of Compliance for Electrical Work).

Safety switches

Lights moved onto new RCDs (safety switches) after a roofing screw pierced the cable.

Electrical work in Belmont: common questions

Why does my lighting circuit keep faulting?

A screw through a cable in the ceiling is one cause. In one local home a roofing screw had pierced the lighting cable, so we repaired it and put the lights on new safety switches.

Why didn't my safety switch trip when my outdoor light filled with water?

The earth wire may be broken. At one Belmont North home the wet metal light's earth was open circuit, which is likely why it never tripped. Leave it off and call us.

Can you run power to my shed?

Yes. We connected power to one Belmont shed and fitted power points, an LED light and a sensor light outside.

Things stopped working after a storm. Can an electrician check them?

Yes. After one electrical storm in Belmont we isolated and tested each item that had stopped working, and gave the owner a written list of what could not be repaired.

Can you replace a rangehood in a Belmont rental?

Yes. We removed a dead slide-out rangehood from one Belmont rental, fitted a new one and left spare filters, with a CCEW (Certificate of Compliance for Electrical Work).