Renovated kitchen with LED downlights and strip lighting

Appliance Installation in Newcastle

You bought it. We fit it.

Appliance installation and replacement for homes and rentals across Newcastle, Lake Macquarie, Maitland and Port Stephens.

5.0 from 205 Google reviews

  • On timewe call when we are on the way
  • Fixed pricein writing, before we start
  • Lifetimeworkmanship warranty
  • Licensedcontractor 463908C
  • 2026 winnerHunter Local Business Awards

Bought it already, or still choosing?

You have already bought it

Good. Send us the model and the day it lands. We fit it, test it and take the old one.

Send us the details >
Electrician measuring up on site

You have not bought it yet

Tell us the size of the opening and what the old one plugs into. We will tell you what fits before you spend the money.

Check what fits >

Want this sorted?

Tell us what is going on. We ring you back, usually the same day.

Send us the model first

It has to fit the circuit

Tell us the model before you buy it. We check the cable, the circuit breaker and whether there is a plug base.

Electrician working inside a switchboard

Plugged in, or hardwired

Some replacements need a socket the old one never had. One underbench oven swap needed a new switched socket fitted the same day.

Old boards get found out

A stove swap once uncovered an old fuse sub-board. Better to know that before the new appliance arrives.

Switchboard and meter panel in a home

What we fix, and what we tell you straight

The electrical side is our work

We test the circuit, the outlet and the connection, and we change serviceable parts like an element or a thermostat.

Control boards and electronics are not

When the fault is in the electronics we say so, and we price a replacement rather than a repair bill on the way to the same answer.

Which appliance are you replacing?

Oven stopped heating

We test the circuit and the connection, fit the replacement under licence and take the old one.

Ovens and cooktops >

Cooktop dead or cracked

Fitted, connected and tested, with the isolation switch where you can actually reach it.

Ovens and cooktops >

Rangehood not clearing the smoke

Mounted, wired and ducted or recirculating, to suit the cupboard you have.

Ovens and cooktops >

Freestanding cooker to swap

Old one out, new one in, levelled and connected, and the old one goes with us.

Appliance installation in Newcastle, start to finish

  1. Tell us the appliance

    The model, or the size of the opening and what the old one plugs into.

  2. Fixed price in writing

    What it costs, before we start. Free estimate from your photos where we can.

  3. Connected, tested, certified

    Connected under licence and tested, so your appliance warranty holds. You get a Certificate of Compliance for Electrical Work (CCEW).

  4. Old one goes with us

    The old appliance leaves with us on the day, not next week.

From our job sheets

More than 100 appliance jobs in the last twelve months, at more than 100 properties across more than 30 suburbs, including homes and rentals in Raymond Terrace, Ashtonfield, Wallsend, New Lambton and Mayfield.

No power to the cooktop

A cooktop circuit had been locked off with a piece of copper wire. We found it at the switchboard.

A blue flash behind the oven

After a trip, the cabling tested clear. The fault was inside the oven itself, so we quoted a replacement.

Wall oven with nowhere to plug in

The replacement was plug-and-play and there was no socket. We fitted one and finished the job the same visit.

Appliance questions

Can you install an oven I bought myself?

Yes, and that is completely normal. Send us the make and model and the delivery date, we check it suits your cabinet and your circuit, and we fit it for a fixed price.

Do you repair appliances or replace them?

We replace them, and we change the serviceable electrical parts like an element or a thermostat. We do not repair control boards or electronics, and we will tell you when a replacement is the better buy.

How do I know a new appliance will suit my old circuit?

Send us the model before you buy it. We check the cable, the circuit breaker and whether there is a plug base, so there is no surprise on the day.

Do you take the old appliance away?

Yes, the old one goes with us when the new one goes in. Tell us when you book so there is room in the van.

Do I need an electrician to install an appliance in NSW?

For anything hardwired, yes. A licensed electrician has to connect a hardwired oven, cooktop or rangehood, and you get a Certificate of Compliance for Electrical Work (CCEW), which is what most appliance warranties ask for.

Tell us what you are replacing

Answer the appliance questions below and we will check it fits your cabinet and your circuit, then come back with a fixed price.

  • You talk to our team, not a call centre
  • Free estimate over the phone where we can
  • Fixed price in writing before we start

In a hurry? Ring 0400 232 172, any hour, and a person answers.

Replacing an appliance? Answer what you can. Anything you are unsure of, leave blank and we will work it out with you.

What are you replacing?
How wide is the space it goes into? Measure the opening, not the old appliance.
Have you bought it yet?
If we bring one, what sort?
Is the old one plugged in or hardwired?

5.0 from 205 Google reviews

We only use your details to contact you and send your quote for this job. Privacy.

Request a callback Call Text a photo